Description
With DCDC isalation in front and back of the optocoupler
High-speed optocoupler can through Max 40MHZ pluse in theory,not lose step ang not move deviation
5V and resetting with tantalum capacitor filtering better than electrolytic capacitor
Spindle 10A relay
Limit port with wire connection,convenient to connect
Without freewheel diode
With switching power supply chip offer 5V 2A to board
The advantages of the TB6560AHQ chip:
The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
Flush type low heat: The area of the chip can support itself to cool when the current is low
Supports a lot of stepper motors
The advantages in the high-speed running condition
Features:
PWM chopper type sinusoidal micro-order control technology;
segments: the 1,2,8,16 segments, DIP switch settings;
DC power supply up to 40V (peak);
maximum output drive current of 3.5A (peak), with an average output of 2.5A;
Standby automatic semi-flow functionality, reduce heat, reduce energy consumption;
Maximum Pulse Frequency 16KHZ;
interface uses high-speed opto-isolation;
attenuation fourth gear adjustable;
motor running smooth, low noise, no pulse input when the whistle;
compact form factor is easy to install;
pleasing in appearance, the cooling effect is good;
Dimensions: 153mm long * 132mm wide (pcb board size) Weight: 0.45kg
